- Home
- Equipment
Refine by
Rockzone Rockwheel Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
The Rockwheel C2 has a chain driven transmission and delivers just under 13hp. This compact attachment is a great addition to tools for your smaller carriers or demolition robots - 12.7hp Grinder - up to 3t ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
Rockwheel axial single‐drum cutters are utilized when traditional twin drum cutters are either too wide or not properly oriented for the grinding task. When vertical holes or a narrower cut are required an axial cutterhead can do the trick. These rock and concrete cutters have the same power as their twin drum counterparts but with all the power concentrated on a single drum, so look out! A ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
The Rockwheel MXR-C2 has a chain driven transmission and delivers just under 13hp. The MXR-C2 is fully customizable, with options for paddle layout, drum width, amendment feeder system piping, bumpers for tank mixing - 12.7hp Mixer - up to 3t ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
The Rockwheel MXR-G5 mixer is a beast on mini excavators, skid steer loaders and backhoes - 30hp Mixer - 2.5-6t ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
Cut and clean the trench with a single excavator, eliminating attachment changes or use of a second excavator. Precision cutting results in as much as 50% less excavated volume compared to hammers which require a trench to widen as depth increases. Moreover, the cutter bucket is ideal for variable ground conditions where both hard and soft ground conditions are found in close proximity. Dig where ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
Robust enough for the toughest applications, every MXR model has a range of motor configurations that allow adjustment for site-specific conditions and pairing with the hydraulic output of the carrier excavator. In addition to optimizing drum speed, input power, and torque, drums are designed for maximum blending efficiency and homogenization of the substrate. The discontinuous spiral pattern of ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
The Rockwheel G5 is a beast on mini excavators, skid steer loaders and backhoes. The gear-reduction transmission outputs more power into the 16" cutting width. This is a perfect tool for utility project trenching and excavation, concrete demolition or scaling. - 30hp Grinder - 2.5 - 6 ton ...
Manufactured by:Rockzone Americas based inBellefonte, PENNSYLVANIA (USA)
The Rockwheel single‐drum trench cutters are most often utilized when the narrowest cut is required. With a single drum 26"-27" drum, trenches of that width get cut with ease. These trench cutters have the same power as their twin drum counterparts but with all the power concentrated on a single drum. We call this power density, and the high power density of the TC-series equals high ...
